TopDiag JDiag P180
The TopDiag P180 is designed for vehicle electrical systems within the range of 9 to 30 volts. It is a diagnostic tool aimed at making auto repair easier, faster, and more efficient. It supports detection of all 12-24V vehicles electrical systems, such as cars, pickups, SUVs, motorcycles, excavators, steamships, etc. The TopDiag P180 is suitable for a wide range of vehicles and provides comprehensive diagnostic capabilities for efficient troubleshooting and repair.
TopDiag P180 comes with a one-year warranty.
Product Functions:
AC Voltage Measurement
Components Activation
Battery Diagnostics
Injector Test
DC Voltage Detection
Resistance Testing
Diode Testing
Product Features:
Breakpoint Detection (Positioning)
The position of the open conductor can be quickly detected. Plug the tip of the probe into an open wire, send a sonic signal to the wire, and use the P181 wire finder to follow the wire from the tip of the probe to find the location of the breakpoint.
Circuit Breaker
Circuit breakers are short-circuit protected and their internal circuit breakers will trip if overloaded.
AC RMS
This mode is used to measure AC voltages and can be used for any AC voltage or pulse waveform signal where RMS average voltage measurements are required.
AC Peak-To-Peak
AC peak-to-peak for any AC voltage signal requiring peak-to-peak voltage measurement.
AC Frequency
The frequency counter mode is used to measure the frequency or pulse width of AC voltage signals for testing, e.g. MAF sensors, wheel sensors etc.
Activate Components
Can be used to activate start fuel pumps, solenoids, blowers, cooling fans, headlights, and other components.
Continuity Testing
Continuity testing is a quick way to see if the wiring in an automotive circuit system is connected or disconnected.
Injectors Test
This mode provides a complete display of injector circuit data, allowing a quick view to understand injector test results.
Voltage Testing
Ultra-wide voltage range to meet various testing needs. Supports 0-200 VDC voltage measurement and -100 VAC ~ +100 VAC voltage measurement.
Battery Diagnostics
Multiple detection modes, more accurate detection data, safer travel.
Support Multiple Languages
English, Simplified Chinese, Traditional Chinese, Japanese, Korean, French, German, Italian, Turkish, Polish, Indonesian, Spanish, Portuguese, Russian, Vietnamese, Thai, Arabic, and many more.
Product Specifications:
AC Voltage Measurement: -100 VAC to +100 VAC
Display: TFT color display, 160 x 128 DPI
Frequency: 1 Hz to 1 MHz
Power Supply: 9-30V DC power system
Resistance: 0.1 Ω to 1 MΩ
Working Temperature: 0°C to 60°C (32°F to 140°F)
Trip Current: 8 AMPS for 1 hour/12 AMPS for less than 1 hour/16 AMPS for less than 5 seconds
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
DC Voltage Measurement: 0V to 200V
Package includes
1pc x circuit tester
1pc x wire finder
1pc x cigarette lighter cable
1pc x probe
1pc x clip cable to connect battery
1pc x extension cable
1pc x user manual
TopDiag P181 wire finder, receiver can be used with the latest version of P200 and P200PRO devices to locate breakpoints.
If you have not upgraded to the latest version, you can visit the official website to download the latest program for upgrading.
TopDiag P181 comes with a one-year warranty.
Working voltage: 9V
Package includes
1pc x TopDiag P181 Wire Finder
