Software donwload link:
https://mega.nz/file/XQBxQYJa#PCG90P9N1UZpdB_pf96McScFGliXOX1lNoI4WyH01AA
A191-RE-VCI3 V236 (2025.3)
https://mega.nz/file/HJ5jjJYC#riosHA82O3lfE-rBiVK8C1rXaKCgfIUN8S7k62LVa9k
A191-RE-VCI3 V240 (2025.3)
RE-VCI3 with USB+WIFI. 1:1 original driver, supports all R-enault models from 1994 to 2025.
1. Support Kline to buy old cars, support new cars, but you need to hold the token yourself.
New car programming and special functions require you to have a token and a dongle.
2. Support ECU programming/coding.
3. Support full system diagnostic functions.
4. Testable systems: engine, automatic transmission, air conditioning system, SRS, ABS, ASR, MPL, GM, anti-theft system, KEYZESS GO system and OBD-II system, etc.
5. It has powerful functions such as reading fault codes, clearing fault codes, dynamic data flow, computer programming matching, component testing, etc.
6. Support win7/win10
download links software free.
--Newest V237 software with activation license !!!
Support car protocols:
ISO-9141 K-Line
ISO-14230 K-Line
ISO-15765 CAN
ISO-11898-2 DWCAN
ISO-11898-3 DWFTCAN
Functions:
Integrated information system
Group coding and adaptability
Programming of control units
Start-up execution mechanism
Display of complete information of R-enault vehicles
Automatic diagnosis of vehicle electronic systems
Testing of airbag modules
Perform OBD tests
Multi-service functions:
R-enault can clip has multiple service functions, including: oil reset, EPB reset, SAS calibration, DPF regeneration, headlight, TPMS reset, ABS automatic bleeding, battery registration, throttle reset, injector coding, power balance, suspension calibration, transmission adaptation, etc.
Oil reset: After changing the oil, a new countdown reset is performed on the engine oil life system.
EPB reset: Reset the brake pads to safely and effectively maintain the electronic brake system.
SAS calibration: Clear the fault steering angle sensor memory and calibrate the steering angle sensor.
DPF regeneration: Clears the blockage through the continuous combustion of particulate matter captured in the DPF filter.
Full OBD2 test mode
Read fault code: After scanning the vehicle, the diagnostic fault code is displayed.
Reset fault code: According to the prompt of the scanner, the fault code is cleared after the repair is completed.
Real-time data streaming: Displays continuous data streaming information from the vehicle in the form of real-time graphical (waveform) display.
I/M (Inspection & Maintenance) Readiness Status displays whether the various emission-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Freeze Frame: Reads and displays live ECU/PCM data streams, graphically plots functions, and stores freeze frame data.
Onboard Monitor Test: Checks specific vehicle conditions recorded by the onboard computer when an emission-related fault occurs.
Oxygen Sensor Test: Allows the results of the most recently performed oxygen sensor monitoring test to be retrieved and viewed from the vehicle's onboard computer. (Note: This feature is not supported on vehicles that use the Controller Area Network (CAN) protocol for communication)
Onboard Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information: Displays information such as VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration Verification Number).
Component Test: Commands sent via the scanner can activate certain vehicle components to test their operability.